Frequency Electronics, Inc. FEI-Zyfer, Inc.
GPS Time and Frequency Systems
   

Printer Friendly
Data Sheet (pdf)

Click to Download Product Data Sheet...

For Information Call
714-933-4000
 


System Features:

8 I/O Module Slots
    
Extended Option
    Module Capability
    100+ Option Modules

Time Accuracy:  
    < 50ns Peak (UTC)
   
GPS Receiver:
    
Standard Civil C/A-Code
    and/or SAASM MPE-S
    GB-GRAM or SAASM
    Force 22E MRU Military

User Interface:
   
Standard RS-232
    Ethernet I/O
    (Telnet, SNMP)
    Keypad, VFD display

Remote Access Utility:
    Zyfer™ Monitor

Standard Outputs:
   
1 PPS, 10 MHz

Calibration:
    
All units are calibrated
    with an in-house
    standard traceable
    to UTC

    
 

 GSync II Model 402

The GSync II is the 2U compact version of the popular and versatile GSync, and provides eight output module slots. The heart of the GSync II is the GTF (GPS Time and Frequency) module within the unit. It is self-contained with a Quartz or Rubidium oscillator, and a commercial C/A GPS receiver or a military SAASM GPS receiver (Rockwell-Collins MPE-S GB-GRAM or Trimble Force 22E MRU).

If a system needs a Primary Reference Source (PRS), the GSync II provides either Standard Positioning Service (SPS) GPS (the civil C/A signal) or the very latest in GPS military technology—SAASM Precision Positioning Service (PPS) GPS receivers
(for approved users only). With GPS as the reference source, the GSync II provides a frequency accuracy of 1E-12 and a time accuracy to < 50 ns Peak to UTC, for calibrated units. The GSync II is also designed to take external inputs to provide internal frequency
synchronization to the accuracy of the external source.

There are two choices of disciplined oscillator selection. An Ovenized Quartz Crystal Oscillator (OCXO) or a Rubidium Atomic Oscillator can be specified. The GSync II can be populated with up to (8) option modules.

There are a wide variety of output option modules available: Low-Phase Noise sine wave, T1/E1, Time Codes, and Network Time Protocol (NTP). The full line of common GSync II and CommSync II option modules are shown in the option module listing on our web site.

For Monitor and Control functions there is an RS-232 communication port on the rear panel of the chassis and a standard Ethernet port providing Telnet, SNMP, and Network Time Protocol (NTP), as well as IEEE PTPv2 IEEE 1588-2008.

FEI-Zyfer products come with a standard 2 year factory warranty (parts & labor).
 

   Rear Panel View    
       
     
 

Antenna / Comm
1 PPS / 10 MHz
RJ-45 Ethernet

8 Input / Output
Hot-Swappable Option Module Slots

Power Supply
AC or DC

 

   

 Available Option Modules for CommSync II and GSync Products

 
 
Power Options System
Control
Modules
Frequency
Modules
Time Modules Clock Rate
Modules
Reference
Options
Antennas
and
Accessories
 
       
 Output Specifications (a)
       
  Frequency Accuracy:    
 
 24 Hour Average  Rubidium Oscillator  Quartz Oscillator
 Locked to GPS  < 1E-12  < 1E-12
 Holdover (b) - first 24 hours  < 5E-12  < 1E-10
 
       
  Time Accuracy: - to UTC, for calibrated units (c)    
 
   Rubidium Oscillator  Quartz Oscillator
 Locked to GPS  < 50 ns Peak  < 50 ns Peak
 Holdover (b) - first 24 hours  < 3 μs  < 7 μs
 
       
  Short Term Stability (d) typical:    
 
 Allan Deviation  Rubidium Oscillator  Quartz Oscillator
 1 sec  < 3E-11  < 1E-11
 10 sec  < 1E-11  < 1E-11
 100 sec  < 3E-12  < 1E-10
 
       
  Phase Noise (d) typical:    
 
   Standard Output  Low Noise 5MHz
 1 Hz  < -90 dBc/Hz  < -105 dBc/Hz
 10 Hz  < -105 dBc/Hz  < -130 dBc/Hz
 100 Hz  < -125 dBc/Hz  < -150 dBc/Hz
 1 kHz  < -135 dBc/Hz  < -158 dBc/Hz
 
       
 GPS Receiver Options
       
 
 Standard GPS Receiver - Civil C/A-Code:
 Type:  8 to 12 channel, independent tracking
 Frequency:  1575.42 MHz (L1)
 Code:  C/A
 Acquisition Time: (c)  Warm Start: < 2 minutes, Cold Start: < 20 minutes.
 
       
 
 SAASM GPS Receiver - Military P(Y)-Code: (e)
 Type:  12 channel, independent tracking
 Frequency:  1575.42 MHz and 1227.60 MHz (L1 & L2)
 Code:  C/A and P(Y)
 Acquisition Time: (c)  Warm Start: < 2 minutes, Hot/Cold Start: Dependent on
 Initialization Device
(f).
 Keyload Interface:  DS-102
   
 FORCE 22E MRU SAASM GPS Receiver - Military C/A and P(Y)-Code: (e)
 Type:  24 channel, simultaneous tracking of L1, L2 and C/A codes
 Frequency:  1575.42 MHz and 1227.60 MHz (L1 & L2)
 Code:  C/A and P(Y)
 Acquisition Time: (c)  Warm Start: < 2 minutes
 Hot/Cold Start: Dependent on Initialization Device
(f).
 Keyload Interface:  DS-102
 
       
 Standard Input/Output
       
 
 Rear Panel (All models)  
 1 PPS, 50 Ω, TTL level, BNC, Ext. Sync Input  
 RS-232 I/O connector  
 10 MHz, 50 Ω, TTL level, BNC connector  
 1 PPS, 50 Ω, TTL level, BNC connector  
 GPS Antenna, TNC connector  
 RJ-45 Fast Ethernet  
   
 SAASM Front Panel  
 1 Keyload connector, 1 Hot Start connector, 1 Zeroize button
 
       
 Power Input Options
       
 
 AC Input:  100-120 & 200-240 VAC, 130 W maximum, 47-63 Hz
   
 DC Input:  24 VDC (18-36 VDC, 100 W maximum)
 48 VDC (36-76 VDC, 100 W maximum)
 12 VDC (11.5-18 VDC, 150 W maximum)
 
       
 Chassis Physical Dimensions
       
 
 Height:  87 mm (3.50") (2U)
 Width:  438 mm (17.25) (19" EIA Rack)
 Depth:  381 mm (15") including connectors
 Weight:  15 lbs. (max.)
 
       
 Environmental
       
 
 Operating Temperature:  0° C to 50° C
 Rate of Change:  10° C/Hour
 Storage  Temperature:  -40° C to +85° C
 Relative Humidity:  5 % to 95 %, non-condensing
 Altitude, Operating:  -60 m to 4000 m
 Altitude, Storage:  -60 m to 9000 m
 EMC / EMI: FCC Code of Federal Regulations 47CFR Part 15, Subpart B, Class B
 
       
 Notes
       
 
(a) After 24 hours of GPS locked operation, fixed antenna location, antenna delays entered.
(b) After 48 hours of continuous operation.
(c) 2σ (95.5 % probability).
(d) Detailed specifications for various output modules: See "Option Module User's Manual 385-8003".
(e) U.S. Government policy restricts the sale of Precise Positioning Service (PPS) equipment to those
authorized by the U.S. Department of Defense. Non-U.S. authorized users must purchase PPS equipment
through the Foreign Military Sales (FMS) process.
(f) Dependent on the accuracy of initialization parameters from PLGR or DAGR handheld SAASM GB-GRAM receivers, or other initialization devices.
(g) Located on front panel.
 
     
 

Product specifications subject to change without notice.

 


ISO 9001:2008 Certified
Careers | Legal | News & Events | About Us | Privacy Statement

Back to Top