Frequency Electronics, Inc. FEI-Zyfer, Inc.
GPS Time and Frequency Systems
         
         
     

 

   
     

For Information Call
714-933-4000

 
         
         
         
         
 

FEI-Zyfer, Inc., the leading provider of precision time and frequency reference systems, offers a IEEE 1588-2008 Precision Time Protocol (PTPv2) Dual Port Ethernet, Input/Output Module for our CommSync II® family of systems.

The PTPv2 Modules allow customers to configure new or existing systems to support both PTPv2 and legacy requirements. As with other FEI-Zyfer module options, the modules are hot-swappable and can be configured in any CommSync II, CommSync II-D, GSync or GSync II systems with available slots. The PTPv2 Modules are available in three versions: with an RS-232 Status & Control port, or with a 1 PPS external reference input, or with 1, 5, or 10 MHz external reference inputs via either coaxial or fiber-optic cables.

IEEE 1588 is designed for small LAN’s requiring precise timing and synchronization beyond what can be attained with NTP v4. FEI-Zyfer’s PTPv2 products support the IEEE 1588–2008 (PTP v2) protocol which includes enhancements over previous PTP versions such as transparent clocks for improved accuracy, fault tolerance and faster update rates.

Gigabit Ethernet PTPv2

385-4106-03
Gigabit PTP Module


Three PTPv2 Module
    versions available

100 nanosecond
    accuracy over Ethernet
   
via pass-through hubs

PTP Grandmaster or
   Slave,
software
    configurable

Gigabit Ethernet I/O
   
Includes Telnet, SSH,
    SNMP, SNTP and NTP

IPv4 and IPv6 support

External Reference
    Input Options:
    1PPS:
   
50 Ω Coax, BNC
    1, 5 or 10 MHz:
   
50 Ω Coax, BNC or
    Fiber Optic, ST conn

External Reference
    Media Options
   
Coax via BNC
    Fiber Optic via ST

Support:
   
Lifetime support and
    software upgrades
    included

 
   
   
   
   
   
   
   
   
   
   
   
   
   
 

The PTP v2 Modules provide one 10/100Base-T and one 100/1000BaseT IPv4 and IPv6 TCP/IP Ethernet connections. This allows the same Ethernet module to connect to two separate networks for controlling and monitoring of the CommSync II family of systems through Telnet, SSH or SNMP. The PTPv2 modules are configurable as either a PTP Grandmaster or Slave via the system RS-232 port or via the Ethernet port (Telnet). In addition to providing PTP Grandmaster capability, the module also provides (NTP/SNTP) network time service. When referenced to GPS, the PTPv2 Module can also be used as a Network Measurement device, allowing for the monitoring and measuring of PTP Grandmaster performance. Easy to read diagnostic LEDs on the Module provide for immediate visual identification of module status.
 
 
   
   
   
   
   
   
   
   

Product specifications subject to change without notice.


ISO 9001:2008 Certified
Careers | Legal | News & Events | About Us | Privacy Statement

Back to Top